You can 3D print your own Audiomatica microphone stand adapter.

The adapter has a 3/8” standard thread and fits Audiomatica MIC-01, MIC-02 and MIC-03 microphones.

We suggest to print with 0.1 mm resolution and 100% infill. There are two parts to print, a 3/8 threaded base and the microphone holder. Please note that the hole in the microphone holder part is not completely open and should be finished by drilling using a 3 mm drill bit. To complete the assembly you will also need an M3 nut and an M3 – 10 mm flat head screw.

Please fill the form below to receive the .STL files (registered system only will be processed):